Search found 550 matches

by muddywater
Fri Dec 17, 2004 5:11 pm
Forum: Bronco Fix Mailing List Archive
Topic: 5.0L Expl. headers
Replies: 1
Views: 13154

5.0L Expl. headers

Along these same lines, anybody ever tried to fix the header on the passenger side before having the exhaust installed? Just wondered if you could cut the end of the header off and tweek it to a better position? Ben ----- Original Message ----- From: "Brian Wickert" <bwickert@sti.net> To: "Ken" <bro...
by muddywater
Thu Dec 16, 2004 10:16 am
Forum: Bronco Fix Mailing List Archive
Topic: Poll on steering wheel size
Replies: 3
Views: 16313

Poll on steering wheel size

Here is a new poll:  What is the best steering wheel diameter for the EB with power steering? 13.5/ 14/ 14.5/ 15 inches??  I have always run the small diameter whell in the 13.5- 13.75 size. Always felt like it was a bit on the small size and was considering jumping to a 14.5-15 wheel. Course my box...
by muddywater
Wed Dec 15, 2004 8:45 pm
Forum: Bronco Fix Mailing List Archive
Topic: Complete AC setup
Replies: 0
Views: 8055

Complete AC setup

AC setup is sold! 
 
thanks,
 
Ben
by muddywater
Wed Dec 15, 2004 9:44 am
Forum: Bronco Fix Mailing List Archive
Topic: 10 deg bushings
Replies: 0
Views: 7624

10 deg bushings

Anybody have and update on these?
 
Ben
by muddywater
Tue Dec 14, 2004 3:16 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with 5.0 install
Replies: 0
Views: 7581

help with 5.0 install

Hey someone remind me the best upper rad hose to use for the sefi install? Was it a 69-70 Pontiac 400?
 
thanks Ben
by muddywater
Tue Dec 14, 2004 12:40 pm
Forum: Bronco Fix Mailing List Archive
Topic: 3G needed
Replies: 0
Views: 4277

3G needed

Anybody out there in Bronco land have a 3G that they want to sell?  Doesn't need to be working.
 
thanks Ben
by muddywater
Mon Dec 13, 2004 11:48 am
Forum: Bronco Fix Mailing List Archive
Topic: Here I go again, 92 5.0 for sale
Replies: 1
Views: 4544

Here I go again, 92 5.0 for sale

Allright guys! this has got to go!! paid 800 will take 575.00 and might deliver depending on where you live.   thanks ben ----- Original Message ----- From: Ben Franklin ( bfranklinisg@earthlink.net ) To: bronco list ( mail@broncofix.com ) Cc: ecbr@yahoogroups.com ( ecbr@yahoogroups.com ) Sent: Satu...
by muddywater
Sat Dec 11, 2004 12:21 pm
Forum: Bronco Fix Mailing List Archive
Topic: Here I go again, 92 5.0 for sale
Replies: 1
Views: 4544

Here I go again, 92 5.0 for sale

I know, I know I always get accused of posting stuff for sale!   So here it goes again!    I bought a mostly complete 92 5.0 HO motor with about 80,000 K on it and I pulled the motor after driving it around. Then a day later, a local mustang guy tells me about a local 89 5.0 that was pulled and stuc...
by muddywater
Sat Dec 11, 2004 12:07 pm
Forum: Bronco Fix Mailing List Archive
Topic: BBK Intake
Replies: 1
Views: 4233

BBK Intake

Wow great deal and great looking intake! Ben ----- Original Message ----- From: "Dan Davis" <a69eb@hotmail.com> To: <ebml@bronco.com>; <mail@broncofix.com> Sent: Saturday, December 11, 2004 12:08 AM Subject: [Bfix] BBK Intake > Anyone seen these yet? They look pretty cool. I am sure they are > desig...
by muddywater
Sat Dec 11, 2004 12:05 pm
Forum: Bronco Fix Mailing List Archive
Topic: If you cut the rib off of your runflat, please send to me
Replies: 1
Views: 4384

If you cut the rib off of your runflat, please send to me

Damn your old! 8-) Maybe we should start calling you Grampa Bob instead? Ben ----- Original Message ----- From: "RLewisJr." <RLewisJr@QNET.COM> To: "'Jack Covert'" <ironbenderii@yahoo.com>; <mail@broncofix.com> Sent: Saturday, December 11, 2004 12:27 PM Subject: RE: [Bfix] If you cut the rib off of ...
by muddywater
Fri Dec 10, 2004 9:02 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with FRPP manual
Replies: 1
Views: 4157

help with FRPP manual

Anybody know where I can find a copy of the FRPP wiring installation manual for the SEFI harness they used to sell? I know I have seen it on some sight, just can't remember where?
 
thanks Ben
by muddywater
Thu Dec 09, 2004 7:47 pm
Forum: Bronco Fix Mailing List Archive
Topic: OT: computer help
Replies: 0
Views: 3483

OT: computer help

Can't seem to get my sound card to work anymore? Anybody care to help?
 
thanks ben
by muddywater
Wed Dec 08, 2004 8:46 pm
Forum: Bronco Fix Mailing List Archive
Topic: polishing aluminum
Replies: 2
Views: 4882

polishing aluminum

Damn, they do look awesome though!   Ben ----- Original Message ----- From: Keith Forrest ( rkforrest@charter.net ) To: Ben Franklin ( bfranklinisg@earthlink.net ) Cc: mail@broncofix.com ( mail@broncofix.com ) ; ebml@bronco.com ( ebml@bronco.com ) Sent: Wednesday, December 08, 2004 8:22 PM Subject: ...
by muddywater
Wed Dec 08, 2004 3:42 pm
Forum: Bronco Fix Mailing List Archive
Topic: [ECBR] AOD and Gears
Replies: 3
Views: 6577

[ECBR] AOD and Gears

I would have to beleive the tach in your rig is faulty? Ben ----- Original Message ----- From: "Bronco" <bronco@evaluationsinc.com> To: "Mike Bowlin" <MBowlin@bresnan.net>; "Bronco" <bronco@evaluationsinc.com>; "BroncoFix" <mail@broncofix.com> Sent: Wednesday, December 08, 2004 4:30 PM Subject: RE: ...
by muddywater
Mon Dec 06, 2004 6:46 pm
Forum: Bronco Fix Mailing List Archive
Topic: valve covers
Replies: 0
Views: 2334

valve covers

Anybody, know if the bronco script valve covers can be used or converted to use with the 5.0?
 
thanks Ben
by muddywater
Sun Dec 05, 2004 2:07 pm
Forum: Bronco Fix Mailing List Archive
Topic: Entire D44 Assembly on Ebay
Replies: 2
Views: 3377

Entire D44 Assembly on Ebay

Hell, I got more or less the same thing for 250.00 but have had not takers yet! Mine includes the radius arms, trac bar, steering linkage but no axles.   Throw me a bone somebody! Trying to buy another motor for the EB!   Ben ----- Original Message ----- From: Bronco ( bronco@evaluationsinc.com ) To...
by muddywater
Sun Dec 05, 2004 7:51 am
Forum: Bronco Fix Mailing List Archive
Topic: SEFI no start update
Replies: 8
Views: 7567

SEFI no start update

Hey, jack what kind of a motor is this? If it is a 5.0 I thought all of them were simply torque them down to X ftlbs and forgot about them, no adjustment necessary? Ben ----- Original Message ----- From: "Jack Covert" <ironbenderii@yahoo.com> To: <mail@broncofix.com>; <ryan@fordfuelinjection.com> Se...
by muddywater
Sun Dec 05, 2004 7:40 am
Forum: Bronco Fix Mailing List Archive
Topic: Hood Scoop
Replies: 1
Views: 2544

Hood Scoop

Clint, you may want to ask around on all the EB lists as I found one out of Oklahoma for 200.00 and it was a new protofab hood! One of the listers was having his EB painted and saw it leaned up against the wall at the body shop and asked about it and the owner told him it had been there for several ...
by muddywater
Sat Dec 04, 2004 1:59 pm
Forum: Bronco Fix Mailing List Archive
Topic: [ECBR] parts for sale
Replies: 0
Views: 1814

[ECBR] parts for sale

Whoops, my mistake the Scout knuckles will not fit the dana 30. My bad! By the way, the SEFI upper and lower stuff has been sold. thanks Ben ----- Original Message ----- From: "Ben Franklin" <bfranklinisg@earthlink.net> To: "bronco list" <mail@broncofix.com> Cc: <ecbr@yahoogroups.com> Sent: Friday, ...
by muddywater
Sat Dec 04, 2004 8:13 am
Forum: Bronco Fix Mailing List Archive
Topic: welder for sale
Replies: 2
Views: 2800

welder for sale

Yep good points! thanks for the help!   Ben ----- Original Message ----- From: Brian Wickert ( bwickert@sti.net ) To: Ben Franklin ( bfranklinisg@earthlink.net ) ; bronco list ( mail@broncofix.com ) Sent: Saturday, December 04, 2004 1:04 AM Subject: Re: [Bfix] welder for sale You forgot the best opt...
by muddywater
Fri Dec 03, 2004 9:57 pm
Forum: Bronco Fix Mailing List Archive
Topic: parts for sale
Replies: 1
Views: 2669

parts for sale

Trying to get money together for a new motor for the busted bronco 8-(   73mm C&L mass air meter: 70.00 aluminum edelbrock intake for a 351w: 95.00 Alumn pair of Ford motor sport valve covers for a 302: 75.00 1- complete upper and lower stock 5.0 intakes with EGR spacer and throttle body, fuel rail ...
by muddywater
Fri Dec 03, 2004 9:39 pm
Forum: Bronco Fix Mailing List Archive
Topic: welder for sale
Replies: 2
Views: 2800

welder for sale

Hey I have decided to sell the Link Arc under hood welder that I have on my 75 EB. This is just like the Premeir power welder only this one is red not blue. Alternator and box have very few miles on them. The alternator is the 160amp version. Comes with the control box and the welding cables, the un...
by muddywater
Fri Dec 03, 2004 8:15 pm
Forum: Bronco Fix Mailing List Archive
Topic: only in texas
Replies: 4
Views: 3943

only in texas

Maybe I am just a crazy redneck at heart but without the quail bumper and the big ass seat up on top! It might hold some promise as a dandy tow rig? If it had some big conversion seats in the back you could use it to sleep in too. Hell just a blow up mattress.   Ben ----- Original Message ----- From...
by muddywater
Thu Dec 02, 2004 10:01 am
Forum: Bronco Fix Mailing List Archive
Topic: Is a A9P the same as A9L??? I hope
Replies: 18
Views: 11000

Is a A9P the same as A9L??? I hope

Along these same lines can someone tell me how the CW3 computers work as compared to the A9P or A9L? thanks Ben ----- Original Message ----- From: "Joe Lougee" <71broncoman@prodigy.net> Cc: "Bill" <brute290@yahoo.com>; <mail@broncofix.com> Sent: Wednesday, December 01, 2004 8:28 PM Subject: Re: [Bfi...
by muddywater
Tue Nov 30, 2004 8:47 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with heads
Replies: 1
Views: 1797

help with heads

Hey guys, I want to install a set of 351w heads on a 302? Is this possible? If so what do I need to buy or do to make it work?
 
thanks Ben
 
Oh yeah I need to know ASAP!
by muddywater
Sun Nov 28, 2004 9:13 pm
Forum: Bronco Fix Mailing List Archive
Topic: F-150 box rebuilders
Replies: 5
Views: 2492

F-150 box rebuilders

I would get west texas off road to rebuild and convert the box to a four turn. Buy the flaming river upgrade and install it the same time you do the 2" bodi lift otherwise you will have to cut off too much to make it fit with no bodi lift and it won't work later when you do upgrade to the 2" lift. I...
by muddywater
Sat Nov 27, 2004 10:48 am
Forum: Bronco Fix Mailing List Archive
Topic: help with intakes
Replies: 1
Views: 1201

help with intakes

Hey does anyone know how the edelbrock EFI intake compares to the stock Explorer intake? Interested in making as much torque with a 5.0 as possible. Also has anyone ever tried the intake spacers for heat reduction and torque? They sell a 3/8 spacer and a 1" spacer? I am wondering how these would per...
by muddywater
Thu Nov 25, 2004 8:44 am
Forum: Bronco Fix Mailing List Archive
Topic: [CA Bronco List] WildHorses Rocks!
Replies: 2
Views: 1775

[CA Bronco List] WildHorses Rocks!

Hey has anyone noticed that you can no longer find the 5.0 aluminum radiators online at WH or at JBG either? Wonder why they are not showing them? Or if they have been discontintued?   Ben ----- Original Message ----- From: Rich Correia ( rich_correia@sbcglobal.net ) To: mail@broncofix.com ( mail@br...
by muddywater
Wed Nov 24, 2004 3:42 pm
Forum: Bronco Fix Mailing List Archive
Topic: Heads for sale
Replies: 0
Views: 1042

Heads for sale

Hey guys, I have a newly rebuilt set of World Products SR, heads with the big 2.02/1.60 valves for sale. I was going to use them on my 94 5.8 project but it's not going to work out at the moment 8-( These heads have no miles since the rebuild. By the way the 94 5.8 is for sale as well, this is the f...
by muddywater
Sun Nov 21, 2004 8:30 pm
Forum: Bronco Fix Mailing List Archive
Topic: Installing hood pins on Fiberglass hood?
Replies: 2
Views: 1944

Installing hood pins on Fiberglass hood?

Thom is right as usual! Buy the autofab hood pins and then buy a really good set of small locks to use in place of the hood pins if you need that much security! Several of the lock companies makes some really nice and heavy duty locks that are small. Ben ----- Original Message ----- From: "PW" <ntsq...
by muddywater
Thu Nov 18, 2004 7:20 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with 94 5.8
Replies: 11
Views: 2395

help with 94 5.8

Anybody know what kind of pistons were used in the 69 351w? Were they domed or dished? thanks Ben ----- Original Message ----- From: <TonyNokes@Freightliner.com> To: <lackkevi@inconnu.isu.edu>; <bfranklinisg@earthlink.net> Cc: <mail@broncofix.com>; <ecbr@yahoogroups.com> Sent: Thursday, November 18,...
by muddywater
Thu Nov 18, 2004 7:02 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with 94 5.8
Replies: 11
Views: 2395

help with 94 5.8

Thanks, I am using cast heads. Ben ----- Original Message ----- From: "Kevin Lackey" <lackkevi@inconnu.isu.edu> To: "Ben Franklin" <bfranklinisg@earthlink.net> Cc: "bronco list" <mail@broncofix.com>; <ecbr@yahoogroups.com> Sent: Thursday, November 18, 2004 2:54 PM Subject: Re: [Bfix] help with 94 5....
by muddywater
Thu Nov 18, 2004 1:02 pm
Forum: Bronco Fix Mailing List Archive
Topic: help with 94 5.8
Replies: 11
Views: 2395

help with 94 5.8

Hey does anyone know what the stock 94 5.8 cam profile is?  Or a website that might help with that info? Also does anyone know what the 94 head specs are?  Finally got around to tearing the motor down and will take it to the machine shop hopefully tomorrow? So I need to make some decisions quick! I ...
by muddywater
Thu Nov 11, 2004 3:28 pm
Forum: Bronco Fix Mailing List Archive
Topic: Surprise to me
Replies: 4
Views: 1064

Surprise to me

Hey just thought I would share! My wife suprised me with a new twelve drawer tool box, the ball bearing model! Damn how I love the woman!   By the way, I don't shop much at Sears but she said she got 150.00 off the price because she signed up for the Craftsman club? Didn't cost anything and they sup...
by muddywater
Wed Nov 10, 2004 12:01 pm
Forum: Bronco Fix Mailing List Archive
Topic: Sighting (North Bend, WA) - '68 EB FOR SALE
Replies: 10
Views: 2433

Sighting (North Bend, WA) - '68 EB FOR SALE

Yep, I have done that same thing for a temporary fix years ago. Thats why I knew what I was looking at 8-)   Ben ----- Original Message ----- From: Jeff Brennan ( jeff@compressedairpower.com ) To: Ben Franklin ( bfranklinisg@earthlink.net ) Sent: Wednesday, November 10, 2004 11:06 AM Subject: Re: [B...
by muddywater
Wed Nov 10, 2004 9:56 am
Forum: Bronco Fix Mailing List Archive
Topic: Sighting (North Bend, WA) - '68 EB FOR SALE
Replies: 10
Views: 2433

Sighting (North Bend, WA) - '68 EB FOR SALE

Maybe he was trying to increase his wheelbase 8-)   I would be willing to bet there is probably some rust behind that diamond plate.   Ben ----- Original Message ----- From: Jeff Brennan ( jeff@compressedairpower.com ) To: mail@broncofix.com ( mail@broncofix.com ) Sent: Wednesday, November 10, 2004 ...
by muddywater
Tue Nov 09, 2004 4:28 pm
Forum: Bronco Fix Mailing List Archive
Topic: heater options
Replies: 6
Views: 1049

heater options

If memory serves? Years ago on a 66 bronco I had I mounted the heater craft unit down on the tranny hump and then T'd into the stock heater lines and used both units. All I can remember for sure is that I could start the bronco in the morning (no garage) and let it sit for five minutes and the snow/...
by muddywater
Thu Nov 04, 2004 5:57 pm
Forum: Bronco Fix Mailing List Archive
Topic: 351W engine input?
Replies: 7
Views: 2331

351W engine input?

Anyone have the specs for the 94 5.8 motors? thanks Ben ----- Original Message ----- From: "Brian Wickert" <bwickert@sti.net> To: "William E Sharp" <wesharp1972@yahoo.com>; <mail@broncofix.com> Sent: Thursday, November 04, 2004 4:52 PM Subject: Re: [Bfix] 351W engine input? > If you think there is a...
by muddywater
Mon Nov 01, 2004 8:00 am
Forum: Bronco Fix Mailing List Archive
Topic: OT: Powerstroke problem
Replies: 13
Views: 1974

OT: Powerstroke problem

Don't know yet? He is a farmer that has been busy with crops lately and hasn't swapped it out yet, so we will see. It is still running at the moment but he understands it's probably short lived and at the very least even if that is not his problem know it may be in the future.   Ben ----- Original M...
by muddywater
Sun Oct 31, 2004 8:12 pm
Forum: Bronco Fix Mailing List Archive
Topic: Need 5.0HO Header HELP!
Replies: 5
Views: 1142

Need 5.0HO Header HELP!

As far as the header kit, I would buy the same header peices individually from Summit racing and get the free shipping as well. The Stage 8 kit is nice but the C- clips have to be trimmed on a lot of headers to fit. There are some new locking header bolts in summit catalog that have header bolt with...