Bronco Fix    
Bronco Fix    
 


Home   Gallery   Tech   Glove Box   For Sale
Radius arm caps with brackets?

 
Post new topic   Reply to topic    Bronco Fix Forum Index :: Drivetrain and Suspension
View previous topic :: View next topic  
Author Message
Cstrom
Bfix "What's a Bronco?"
Bfix


Joined: 29 Dec 2016
Posts: 9

PostPosted: Fri Dec 30, 2016 2:58 am    Post subject: Radius arm caps with brackets? Reply with quote

Hey everyone new to the board from South Dakota. I recently picked up a nice uncut 74 Bronco Explorer 302, C4 Auto. The radius arm caps seem to have "brackets" welded on to them. Curious to what this would be for or what purpose they would serve? They were also painted red at one point so I know they are not factory. The guy I picked it up from was in his late 60s, said he bought it from the original owner in 2000. He had replaced the exhaust but other than that it was pretty much stock. Any ideas? Thanks


20161028_003148.jpg
 Description:
See the "bracket"?
 Filesize:  1.55 MB
 Viewed:  86 Time(s)

20161028_003148.jpg



20161220_163322.jpg
 Description:
Pretty decent. Needs rockers and some floorboard work-
 Filesize:  1.36 MB
 Viewed:  80 Time(s)

20161220_163322.jpg



20161220_163419.jpg
 Description:
 Filesize:  1.47 MB
 Viewed:  78 Time(s)

20161220_163419.jpg



_________________
1974 Bronco Explorer- 302, C4,
Back to top
View user's profile Send private message
Stan
BFix Locked and Loaded
BFix Locked and Loaded


Joined: 29 Jun 2004
Posts: 3606
Location: Boring Or

PostPosted: Fri Dec 30, 2016 8:37 am    Post subject: Reply with quote

They're brackets for an extra set of shocks to help eliminate front wheel hop.
Quite common - all three of the Broncos I've owned had/have em.
Stan

_________________
When you come to a fork in the road - take it
Homer - " Facts are meaningless . You could use facts to prove anything that's even remotely true."
Back to top
View user's profile Send private message
Cstrom
Bfix "What's a Bronco?"
Bfix


Joined: 29 Dec 2016
Posts: 9

PostPosted: Fri Dec 30, 2016 4:10 pm    Post subject: Reply with quote

Oh interesting...Judging by the weld it must not be a factory thing? Something some one did as a modification?
_________________
1974 Bronco Explorer- 302, C4,
Back to top
View user's profile Send private message
Stan
BFix Locked and Loaded
BFix Locked and Loaded


Joined: 29 Jun 2004
Posts: 3606
Location: Boring Or

PostPosted: Fri Dec 30, 2016 7:14 pm    Post subject: Reply with quote

Cstrom wrote:
Oh interesting...Judging by the weld it must not be a factory thing? Something some one did as a modification?

Yep - a lot of people/fabricators made and sold em

_________________
When you come to a fork in the road - take it
Homer - " Facts are meaningless . You could use facts to prove anything that's even remotely true."
Back to top
View user's profile Send private message
DirtDonk
BFix Locked and Loaded
BFix Locked and Loaded


Joined: 27 Jul 2003
Posts: 2749
Location: San Jose, CA

PostPosted: Sun Jan 01, 2017 12:19 pm    Post subject: Reply with quote

Great looking rig too by the way. Congrats and welcome to broncofix.com as well.
Interesting that only the caps have the mounts in your case. Normally they'd be accompanied by an upper bracket welded to the spring tower. Since yours is potentially so old that the lowers were welded on many years ago, before the advent of upper hoops to replace the simple brackets, then maybe yours just never got installed. Maybe they lost interest, maybe they didn't get a good weld on there and they tore off?
Do either of the spring towers have anything looking like a thick metal "arm" welded to their forward edge? Maybe some old welds? Be interested to see what is up.
The other thing that happens with these older rigs is that someone might have replaced the caps with some where the tabs were already installed. But with your history of few owners and going back to the original owner, that seems less likely.

Nothing wrong with leaving them on, or even adding the upper mounts and a secondary shock if you decide you need them. Most Bronco owners no longer need dual shocks. The use we put the trucks to just doesn't justify the stiffer ride. However, there is still a need under the right circumstances.
The only reason to remove the lower tabs would be if you decided to reorient the tie-rod to a TRO (tie-rod over) position where the tabs would be in the way. No normal reason to do that on a relatively unmodified Bronco though. Only if you're lifting the suspension a lot, or trying to achieve something where the tie-rod in it's stock position just doesn't work the way you want.

Congrats again on the new-to-you rig.

Paul

_________________
'71 Bronco - 302 4v
3.5" WH/Skyjacker Lift
33 x 11.50 x15 Thornbirds on 15x7 Enkei's
Kayline soft top
Hanson bumpers
Dual batteries, Large 1G alt.

WWW.WILDHORSES4X4.COM Mr. Green
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Bronco Fix Forum Index :: Drivetrain and Suspension All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

Brought to you by The Bronco Horde and Vintage Bronco